Homebrew PCBs

It has a set of Arduino compatible sockets where you can plug in an 
Arduino Peripheral board, there is also an Arduino development 
software package available for it. I will not be using the Arduino 
software but instead use software I'm comfortable with. I have my own 
C, Pascal, and FORTH compilers for ARM.

You need to read the information on the ST site as it explains it in 
detail. The price is right, it's less that $11 for an ARM F4 
development board with 512K of Flash and Arduino compatibility, not 
bad at all. I will be buying a bunch of them as soon as I can get some money.

At 01:10 PM 3/24/2014, you wrote:
>
>
>Hi Cecil,
>Could you explain your comment that it is Arduino compatible please 
>as I have a project that I might be able to use these on.
>Regards, Hamilton
>
>
>
>
>On 24/03/2014 17:50, Cecil Bayona wrote:
>>
>>
>>Thanks, but I'm not the person having problems, I commented on the
>>fact that I did not have any issues with a modified GBC Docuseal 95P.
>>He might have bought a laminator that did have hardware to deal with
>>the PCB thickness, so it jammed and burned out.
>>
>>You have an interesting setup. I want to do a project later in summer
>>where I will have temperature control to an infrared oven by Black
>>and Decker. It will be overkill as I will be using an ARM F4 CPU
>>board to read temperatures from a K thermocouple and control the oven
>>heater along a programmed temperature profile. Way too much CPU power
>>but I can buy it for less that $11 and it's Arduino compatible, good
>>for buying cheap accessory boards. It's the ST Nucleo STM32F401;
>><
>><http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1810?icmp=stm32f401line_pron_nb-dynamic_jan2014>http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1810?icmp=stm32f401line_pron_nb-dynamic_jan2014 
>>
>> >
>>
>>Perhaps after that project I will have the opportunity to do a
>>temperature controller for the GBC laminator, it would be nice to be
>>able to vary the temperature. Since the laminator uses a stepper
>>motor to move the item to be laminated it would be nice to also have
>>speed control of the lamination process.
>>
>>We live in an interesting age, too many toys and not enough time.
>>
>>At 12:25 PM 3/24/2014, you wrote:
>> >
>> >
>> >
>> >I've been using a GBC creative for quite a while now, and I've modded it
>> >for temperature control too. Maybe you just got a bad one?
>>
>>--
>>Cecil - k5nwa
>>< http://thepartsplace.k5nwa.com/ > < http://www.softrockradio.org/ >
>>
>>Never take life seriously. Nobody gets out alive anyway.

-- 
Cecil - k5nwa
<  http://thepartsplace.k5nwa.com/ > <  http://www.softrockradio.org/ >

Never take life seriously. Nobody gets out alive anyway.