Homebrew PCBs

also check your local hobby shop for a product called
tenax 7r it is used for models but after buying some
low and behold it is the same exact thing as what i
already had for plexiglass so give it a try

--- Adam Seychell <adam_seychell@...> wrote:
> They make a special solvent cement for Plexiglas
> (synonyms: 
> Perspex, PMMA). It looks like a clear thick liquid
> and contains 
> methylene chloride and some very volatile solvents.
> The bonds are 
> strong enough to make joints for gluing edge on (
> I've see fish 
> tanks made from this stuff). I would be very
> surprised if the 
> cured cement and/or the plastic will fail in ferric
> chloride. 
> Find anyone who specalizes in plexiglas for the
> correct cement.
> 
> Adam
> 
> Moore wrote:
> > I want to make a board holder out of plexiglass,
> but will need to do 
> > some gluing.  Since it will be fully immersed in
> etchant, what kind 
> > of glue can I use?  Will CA work?
> > 
> > Thanks,
> >  Phil
> > 
> > 
> > 
> > Be sure to visit the group home and check for new
> Bookmarks and files:
> > http://groups.yahoo.com/group/Homebrew_PCBs
> > 
> > To unsubscribe from this group, send an email to:
> > Homebrew_PCBs-unsubscribe@yahoogroups.com
> > 
> >  
> > 
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/ 
> > 
> > 
> 
> 


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/