Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-09 22:20 UTC

Message

Re: [Homebrew_PCBs] Digest Number 4154

2013-10-27 by len.turnbow

> Clearance is needed for high voltage/safety...

Yes! PCB antennas in my case.

Could this be accomplished by specifying a large diameter cutter initially then a smaller diameter cutter to do the detail work, say in two or more passes?

Thanks.

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.