Homebrew PCBs

Hi all - fascinating discussion (I've been lurking for quite awhile)...my
interest is in photoetching shim brass.005 - .010 typically... any
reason(s) this toner transfer won't work for this application? I hope not!
:)
Clark Cone


On Fri, Aug 16, 2013 at 3:49 PM, Rick Sparber <rgsparber@...> wrote:

> **
>
>
> Fernando,
>
> There is no single answer here. Sure, CNC could be used to make boards.
> Most people send their artwork to China and get boards back in the mail.
> Equally valid.
>
> My goal is to find ways to do it with commonly found materials and
> machines. At the present time it looks like I can do it with parchment
> paper, a laser printer, a laminating machine, a kitchen freezer, and a few
> chemicals for etching. That's just part of my hobby and is not necessarily
> the "best" way to do the job. Ultimately, I want to etch a cylinder which
> would be rather tricky with a 3 axis CNC.
>
> Rick
>
>
> -----Original Message-----
> From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
> On Behalf Of Fernando Cassia
> Sent: Friday, August 16, 2013 12:39 PM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: Re: [Homebrew_PCBs] Easy Fast Laser Print DIY Circuit Boards -
> Dave's toner-transfer freezing technique
>
> On Sat, Jul 27, 2013 at 11:59 PM, Robin Whittle <rw@...> wrote:
>
> > I added some distinctive text to this subject line so your message
> > would be easier to find in the archives.
> >
>
> I've been following all the discussions in this list, just as a lurker,
> and have to wonder if perhaps just buying a CNC machine is the answer? See
>
> http://hackaday.com/2013/08/16/101459/
>
> FC
> --
> During times of Universal Deceit, telling the truth becomes a
> revolutionary act Durante �pocas de Enga�o Universal, decir la verdad se
> convierte en un Acto Revolucionario
> - George Orwell
>
>  
>


[Non-text portions of this message have been removed]