Homebrew_PCBs

Lee,

Thanks for the offer. I would certainly like to try the material out.

I've had excellent results from the wax paper from China when used with my
laminator. But now I want to transfer the toner to the perimeter of a piece
of copper pipe and the rules are different. Can't use the heat plus even
pressure of the laminator on the pipe. Really don't want to make a custom
machine either.

I tried my heat gun and rolling the copper over the toner. Just smeared. Got
any suggestions?

Rick

-----Original Message-----
From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
On Behalf Of studleylee
Sent: Wednesday, August 14, 2013 10:59 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Re: Easy Fast Laser Print DIY Circuit Boards -
Dave's toner-transfer freezing technique

Hey Rick, (this is Lee Studley ),
I bought a full roll of this stuff if you would like to play with some. I
haven't tried it yet but it got good press for PCB's

http://www.uscutter.com/ORACAL-651-Intermediate-Cal-Vinyl-24-x-10-Yard-Roll

--- In Homebrew_PCBs@yahoogroups.com, "Rick Sparber" <rgsparber@...> w