Yahoo Groups archive

Homebrew_PCBs

Index last updated: 2026-03-30 17:29 UTC

Message

Re: [Homebrew_PCBs] Dry Film Storage/Posting - Don't Do What I Did!

2013-05-26 by KeepIt SimpleStupid

<snip>

Why not just use a cardboard mailing tube. If you need tape, try Post-it tape or Kapton tape. Kapton is expensive, about $18/roll, but is easily removed even after seeing high temperatures of 200 deg Centegrade. Kapton tape uses a silicon based adhesive.

You could also try for a flat send is to use either Kapton tape on the corners or a triange of paper and Kapton tape to hold the sheet flat on a backer board. Then sandwich with another cardboard.

If you live in the states, I could mail the OP a sample piece of the tape. Contact me via email.


[Non-text portions of this message have been removed]

Attachments