Homebrew PCBs

Ah! My mistake, then. I'm anxious to get some talk going there, so my enthusiasm got the best of me.

Steve Greenfield AE7HD

--- In Homebrew_PCBs@yahoogroups.com, "gulick_steve"  wrote:
>
> Hi Ok, sorry I thought that group was specifically for experiments for modifying inkjet printers for direct printing to PCBs.
> 
> I will now join that group as well. 
> 
> But it is not direct printing to PCBs that I was inquiring about, but rather printing to ink jet film (at grater density) for use in the photo-sensitive process.
> 
> I am currently trying to use R-Film from 
> 
> http://www.silkscreeningsupplies.com/product/WP8.5X11
> 
> It is about $0.50 a sheet. It seems to hold ink very well. I haven't tried the jetstar premium film that seems to be recommended as I haven't found a source in the US for less than about $4.00 a sheet.
> 
> So would like to try sending more ink to it.
> 
> Steve
> 
> --- In Homebrew_PCBs@yahoogroups.com, "AlienRelics"  wrote:
> >
> > Please post questions (and answers! Especially answers!) to the Inkjet PCB Construction group.
> > 
> > http://groups.yahoo.com/group/Inkjet_PCB_Construction/
> > 
> > Steve Greenfield AE7HD
> > 
> > --- In Homebrew_PCBs@yahoogroups.com, "gulick_steve"  wrote:
> > >
> > > Hi I would like to increase the amount of ink applied by my Epson c88. I am using linux with gutenprint. I don't know know how to configure the parameters.
> > > 
> > > Any suggestions at all for techniques for epson printer control would be greatly appreciated!
> > > 
> > > Thanks,
> > > Steve
> > >
> >
>