Homebrew PCBs

Hi Ok, sorry I thought that group was specifically for experiments for modifying inkjet printers for direct printing to PCBs.

I will now join that group as well. 

But it is not direct printing to PCBs that I was inquiring about, but rather printing to ink jet film (at grater density) for use in the photo-sensitive process.

I am currently trying to use R-Film from 

http://www.silkscreeningsupplies.com/product/WP8.5X11

It is about $0.50 a sheet. It seems to hold ink very well. I haven't tried the jetstar premium film that seems to be recommended as I haven't found a source in the US for less than about $4.00 a sheet.

So would like to try sending more ink to it.

Steve

--- In Homebrew_PCBs@yahoogroups.com, "AlienRelics"  wrote:
>
> Please post questions (and answers! Especially answers!) to the Inkjet PCB Construction group.
> 
> http://groups.yahoo.com/group/Inkjet_PCB_Construction/
> 
> Steve Greenfield AE7HD
> 
> --- In Homebrew_PCBs@yahoogroups.com, "gulick_steve"  wrote:
> >
> > Hi I would like to increase the amount of ink applied by my Epson c88. I am using linux with gutenprint. I don't know know how to configure the parameters.
> > 
> > Any suggestions at all for techniques for epson printer control would be greatly appreciated!
> > 
> > Thanks,
> > Steve
> >
>