Low ESR is part of the equation. I could suggest some of their very low ESR 50V caps, but they are similar in price. Just a bit safer regarding accidental contact.
I have some 2V lead acid cells here that will melt and burn a bit of solder wick applied across them in seconds. Don't ask how I know. So a few more volts at many more amps should have a much more violent effect on a thin copper wire.
Steve Greenfield AE7HD
I have some 2V lead acid cells here that will melt and burn a bit of solder wick applied across them in seconds. Don't ask how I know. So a few more volts at many more amps should have a much more violent effect on a thin copper wire.
Steve Greenfield AE7HD
--- In Homebrew_PCBs@yahoogroups.com, Mark Lerman <mlerman@...> wrote:
>
>
> Digikey has them, though they are $16,27 USD each. 820uf at 500 VDC
>
>
> At 11:03 AM 1/2/2013, you wrote:
> >Can you suggest a place where 800uF, 500v caps can be found?
> >
> >