Homebrew PCBs

If you have problems with holes, try my dry erase/white board method.  I posted pictures here and on my blog here: http://www.electro-tech-online.com/blogs/jpanhalt/213-improved-laserjet-transparencies-pcb.html

John
  
  ----- Original Message ----- 
  From: Jefferson Siy 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Wednesday, August 08, 2012 8:00 AM
  Subject: [Homebrew_PCBs] Making film


    
  Hi,

  Am choosing between LaserStar and JetStar premium for making Masks.
  Anyone who has tried them both?
  I usually use 85 GSM tracing paper, but the black areas are full of holes.
  Will the Jetstar/LaserStar have fully black areas?

  Jeff

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]