Homebrew PCBs

Also look for
GBC_laminator_mod

In the Photos section:
<http://groups.yahoo.com/group/Homebrew_PCBs/photos/album/0/list?mode=tn&order=title&start=21&count=20&dir=asc>

Steve Greenfield AE7HD

--- In Homebrew_PCBs@yahoogroups.com, "AlienRelics" <alienrelics@...> wrote:
>
> From the Links section under Toner Transfer, Laminators, there is a link to modifying the GBC H200:
> http://www.qsl.net/ve2emm/pcb/pcb_mach_mod_e.html
> 
> That appears to be the same as Pulsar's writeup of how to modify the GBC H220, essentially just swapping two gears which slows it to 1/4 speed.
> <http://www.pulsarprofx.com/special/H-220/>
> 
> Jeff modified a GBC laminator with custom endplates, here's the thread:
> <http://tech.groups.yahoo.com/group/Homebrew_PCBs/message/26962>
> 
> It is a bit confusing how Yahoo photos put them in order, but look in Photos:
> <http://groups.yahoo.com/group/Homebrew_PCBs/photos/album/0/list>
> 
> And look for the albums:
> "another GBC laminator mod" results
> another GBC laminator mod
> another GBC laminator mod
> 
> With those quotes, and for some reason there are two folders with the same name. One of them is empty, but I don't dare delete it for fear it will delete both.
> 
> Steve Greenfield AE7HD
> 
> --- In Homebrew_PCBs@yahoogroups.com, "krisfr" <krisfr@> wrote:
> >
> > Can someone direct me to the modification of this laminator so I can make some great pcbs. I got it in yesterday and it allowed me to use the board that I wanted to. I was concerned that it would not take the board due to the boards thickeness and being double sided and 2oz copper. Thanks for what ever you can show me.
> > 
> > --- In Homebrew_PCBs@yahoogroups.com, "krisfr" <krisfr@> wrote:
> > >
> > > I just ordered this unit, any suggestions as to getting it to work with HP printer toner method. I will also be using Photo resist method for finer lines and want to apply the Photo resist film with it. Thanks I am new here but long in the tooth.
> > >
> >
>