Homebrew PCBs

Is it the same unit as this? I picked mine up through Amazon.

http://www.pcbfx.com/main_site/pages/products/applicator.html

I use this unit all the time with a Samsung ML-2525 printer and an HP P2055DN. Works fine, no problems at all. I did the simple gear swap as recommended by Pulsar but have not changed the temperature, didn't need to. I use 0.032" boards and pass them through the laminator 6 passes, 8 passes if I have a lot of ground plane.

http://www.pcbfx.com/main_site/pages/tech_support/instructions/Laminator_Modifications/H-220/H-220_Laminator_Modification.pdf



--- In Homebrew_PCBs@yahoogroups.com, "krisfr" <krisfr@...> wrote:
>
> I just ordered this unit, any suggestions as to getting it to work with HP printer toner method. I will also be using Photo resist method for finer lines and want to apply the Photo resist film with it. Thanks I am new here but long in the tooth.
>