I'm not sure it will work. FYI, I do not have this particular laminator, but have tried toner transfer with a few GBC and other brands that do not have a "foil" setting and failed.
A laminator with a "foil" setting is meant to get hot enough to melt Laser toner.
The ad for it says it does not require a carrier. This may mean it does not get as hot as one in which you are meant to use a carrier.
You may need to modify it by adding a temperature control. However, it still may not get hot enough.
Steve Greenfield AE7HD
A laminator with a "foil" setting is meant to get hot enough to melt Laser toner.
The ad for it says it does not require a carrier. This may mean it does not get as hot as one in which you are meant to use a carrier.
You may need to modify it by adding a temperature control. However, it still may not get hot enough.
Steve Greenfield AE7HD
--- In Homebrew_PCBs@yahoogroups.com, "krisfr" <krisfr@...> wrote:
>
> I just ordered this unit, any suggestions as to getting it to work with HP printer toner method. I will also be using Photo resist method for finer lines and want to apply the Photo resist film with it. Thanks I am new here but long in the tooth.
>