Homebrew PCBs

Yes.  Look at
http://myweb.cableone.net/wheedal/pcb.htm
and other links on the homebrewpcb/links area.

Terse version:
Basically print both images --top mirrored; but add cross hairs to 
one side.  Line up cross hairs under a bright light, use a gluestick 
to bind papers on that edge (cross hairs) making an envelope.  
Sandwich copper clad in the middle, insert bound in first into a 
paper laminator, make a couple passes to tack down.  Make a few other 
passes rotating and flipping board to get even pressure/heat.  Do for 
10-12 passes total.  Soak off paper, peel, rub clean. Etch. Drill. 
Stock. Admire......  Test. Curse. Repair netlist.  Restart.
:')

--- In Homebrew_PCBs@yahoogroups.com, "Moore" <pminmo@c...> wrote:
> Is anybody using toner transfer to do double sided boards?  If so 
how?
> 
> Thanks,
>  Phil