Homebrew PCBs

There is a bit of a misquote there.  I do not glue my bubblers to the tank.

I use "Bubble Wall," which is made by Penn-Plax, Hauppauge, NY, USA (www.pennplax.com).  They are a lot smaller than a soaker hose.

John
  ----- Original Message ----- 
  From: Bert Van Kets 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Wednesday, March 21, 2012 3:37 AM
  Subject: Re: [Homebrew_PCBs] Re: Rejuvenating ferric chloride etchants


    
  On 20/03/2012 19:51, sheldon_mp_cooper wrote:
  >
  > --- In Homebrew_PCBs@yahoogroups.com 
  > <mailto:Homebrew_PCBs%40yahoogroups.com>, Philip Pemberton 
  > <ygroups@...> wrote:
  > >
  > > On 19/03/12 22:10, John Anhalt wrote:
  > >
  > > I've got one of those foam bubbler hoses glued to the bottom of the
  > > tank with five-minute epoxy, then a hose running up one side to an
  > > aquarium air pump.
  >
  > I'm interested in that "foam bubbler hose" you mention, but I've never 
  > seen it. Do you have a link to a source for the item or at least a 
  > photo of it so I can know what to look for or ask for at the pet 
  > supply store?
  >
  > Thanks.
  >
  > __._
  >
  >
  > 
  Aren't those hoses also used for trickle irrigation in gardens? They 
  look like grey, thick walled, foamy garden hoses.
  I've had a lot of aquariums but have never come across the type of 
  aeration system you describe.
  Interesting application though.

  Bert

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]