Homebrew PCBs

I'm using a Samsung ML-2525. Works well, just have to make sure you have it set to the darkest settings. I've dedicated this printer for PCB's in the lab. 

Have a look at http://www.pcbfx.com/main_site/pages/start_here/printer_info.html

Also, drop Frank an e-mail at mail@....  He's very good at helping people use his product.

Regards,
Lee

--- In Homebrew_PCBs@yahoogroups.com, "storan4wd" <bob.balderson@...> wrote:
>
> > I saw some one used a samsung laser 1200x1200 dpi with reg.
> > photo paper. 
> 
> Hi Mark,
> 
> I am that someone! Just for interest, I tried using that Samsung ML-1860 laser to print a small piece of Pulsar paper stuck to a regular paper carrier. It was very good indeed - once I remembered to set the paper to "thick".
> 
> I didn't proceed any further but I could see that it ought to give good results to about 10mil.
> 
> It impressed me enough to think about using my old stock of Pulsar paper to make iron on silk screens.
> 
> Regards,
> 
> Bob
>