Homebrew PCBs

Thanks, Big.  Perhaps on my next project I'll try the HP paper.

Donald.
--
*Plain Text* email -- it's an accessibility issue
()  no proprietary attachments; no html mail
/\  ascii ribbon campaign - <www.asciiribbon.org>

----- Original Message -----
> From: "bigbazinga" <bigbazinga@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Saturday, February 4, 2012 12:17:17 PM
> Subject: [Homebrew_PCBs] Re: Toner transfer paper type
> Exactly the opposite experience here. I had generally good experiences
> with magazine covers, sometimes perfect with the paper just floating
> off the board, but it was highly inconsistent even using different
> issues of the same magazine due to the variation in the paper used
> from month to month. Seeking a consistent solution, I looked in the
> database here, found the (obsolete HP part number) paper that was
> raved about there and went on a short quest to find its modern
> equivalent. The first probable HP equivalent I tried was definitely
> the right stuff: HP CG988A, Presentation Paper (Laser), 32lb. I've
> mentioned the likely European equivalent A4 sized part number in an
> earlier post here.
> 
> --- In Homebrew_PCBs@yahoogroups.com, Donald H Locker <dhlocker@...>
> wrote:
> > I quit trying to buy the perfect paper after trying magazine.
> > ULine catalog, IIRC.
> >
> > Donald.
> 
> 
> 
> 
> ------------------------------------
> 
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> 
> 
>