Homebrew PCBs

I've had excellent results with my Epson R280 (Claria black) and Jetstar
Premium film.  However, the printer quality is now high enough that the
software's efforts to deal with low quality paper is the limiting
factor, so I ended up writing my own software.

Here's a sample 5/5 board I did with inkjet:
http://www.delorie.com/pcb/inkjet/insanity_II.html

and some other photos:
http://www.delorie.com/pcb/inkjet/inkmask-via-f.html
http://www.delorie.com/electronics/sdram/sdram-toppcb.html  (6/6)