Homebrew PCBs

remove the comma at the end and the link works.....


On Wed, Dec 14, 2011 at 8:10 PM, MIKE DURKIN <Patriot121@...> wrote:
> Hey ... try that link again ... I just get a "Opss"
>
> To: Homebrew_PCBs@yahoogroups.com
> From: k4gmh@...
> Date: Wed, 14 Dec 2011 20:20:05 -0500
> Subject: [Homebrew_PCBs] Harbor Freight Laminator Modified
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>      Hello,
>
>
>
> Finished making the conversion of a Harbor Freight Laminator to do toner
>
> transfer using Techniks Toner Transfer film.
>
>
>
> The conversion, in addition to increasing the opening to the rollers as
>
> described in a previous post, was to remove the original snap action temp.
>
> controller.  The snap temp. controller was replaced with a digital
>
> controller obtained from Deal Extreme,
>
> http://www.dealextreme.com/p/digital-temperature-controller-66334, as
>
> suggested by Tony Smith.
>
>
>
> Several double sided, 0.0625 inch thick, PCB boards have been made with
>
> good results.  Techniks Toner Transfer film was used.  The toner was put on
>
> the film by a copier at a local United Postal Service store.
>
>
>
> The original was generated by an ink jet printer.  The quality of the
>
> original is important for the quality of the toner transfer using the
>
> copier approach that I use.
>
>
>
> --
>
>   73,
>
>   Mike, K4GMH
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>



-- 
Paul Mateer, AA9GG
Elan Engineering Corp.
www.elanengr.com
NAQCC 3123, SKCC 4628, FPQRP 2003