Homebrew PCBs

Or copper plating it?

Donald.
--
*Plain Text* email -- it's an accessibility issue
()  no proprietary attachments; no html mail
/\  ascii ribbon campaign - <www.asciiribbon.org>

----- Original Message -----
> From: "Erik Knise" <elknise@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Tuesday, November 29, 2011 9:18:51 PM
> Subject: Re: [Homebrew_PCBs] FYI Bare paint....
> Why not cover it with a protective layer?
> 
> On Tue, Nov 29, 2011 at 5:11 PM, MIKE DURKIN <Patriot121@...>
> wrote:
> > so much goes the idea of printing antennas ...
> >
> > To: Homebrew_PCBs@yahoogroups.com
> > From: cachureos@...
> > Date: Tue, 29 Nov 2011 16:26:57 -0800
> > Subject: Re: [Homebrew_PCBs] FYI Bare paint....
> >      even once dry, paint is not water proof so it will fade away
> >      with moisture....
> >
> >>________________________________
> >> http://www.bareconductive.com/about
> >>
> >>takes you to an interesting site selling water based conductive
> >>paint. There are no technical specs available and it doesn't look
> >>like you can solder to it but for some applications it might be
> >>useful.
> >>
> 
> 
> ------------------------------------
> 
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> 
> 
>