Homebrew PCBs

Could work....
I only put the clear paint on afterwards to make some boards look nice.

ST

On Mon, Nov 21, 2011 at 7:24 PM, DJ Delorie <dj@...m> wrote:
>
> Stefan Trethan <stefan_trethan@...> writes:
>> I used double-sided board and just etched the spare copper away (the
>> surface that is left has a perfect micro-rough finish). Sanding never
>> did quite as well.
>
> I wonder if a coat of flat white spray paint (before
> etching/trimming/etc so at least it's neat :) would give a suitable
> surface to adhere toner too.  It would also provide a better background
> for the image.
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>