Homebrew PCBs

That's pretty cool! With this modification can you make the transfer with one pass through the laminator? 

And if not I wonder if the feed speed could be regulated? 

Does making multiple passes through a laminator ever cause misalignment of the artwork and the copper? Slippage? 

--- In Homebrew_PCBs@yahoogroups.com, DJ Delorie <dj@...> wrote:
>
> 
> I've hacked my laminator to be MCU-controlled via a thermocouple, so I
> can set a specific temperature, see it on the lcd, and monitor the
> actual temperature as well.  Total cost was about $50 for the upgrade.
> 
> http://www.delorie.com/electronics/laminator/
>