Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: [Homebrew_PCBs] Laminator selection and hacks

2011-11-15 by DJ Delorie

I've hacked my laminator to be MCU-controlled via a thermocouple, so I
can set a specific temperature, see it on the lcd, and monitor the
actual temperature as well.  Total cost was about $50 for the upgrade.

http://www.delorie.com/electronics/laminator/

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.