Homebrew PCBs

"gulick_steve" <sgulick@...> writes:
> What do you suggest for "the UV films with fast-drying coatings on
> them"?  What about choice of ink for the densest printing?

If you can affort JetStar Premium, it's the best.  With that, I can do
100% coverage with the R280's Claria inks and get a nearly perfect
image.  With JetStar Standard, I reduce the amount of ink to 50% away
from the edges (i.e. full coverage along the edge, with a 50% fill) as
it doesn't quite dry as fast.  Still get nearly perfect images though,
and no pinholes (imagine a 2800 DPI checkerboard pattern for the fill).