Homebrew PCBs

Careful with the color copies/printers. I tried one here at work, and after 3-4 times through the laminator, it was one large blob, kind of like a Roreschark test. Some use either lower temp, or completely different process materials to do the full range of colors. I would stick with B/W laser printers when possible.

Mike

--- In Homebrew_PCBs@yahoogroups.com, "Kevin Urbom" <urbomb@...> wrote:
>
> placed the copy on the board and ran it through the laminator twice,
> then into the oven at 375 degrees for 2 minutes and through the
> laminator again.  soak off the image, and etch in 10% Bacquacil pool
> shock, 30% muriatic acid, and 60% water.  I uploaded pics to the photos
> section under "big boards".  This is the second time that I did this
> size boards, but the first time I silk screened them.
> 
> 
> [Non-text portions of this message have been removed]
>