Homebrew PCBs

There's a printer section in the database area.  I will add my results as soon as I actually etch a board.  So far, I'm finding that the Staples paper is unusable.  Tried 3 times without success. This is disappointing because this paper leaves no residue on the toner.

The magazine paper produced perfect transfers.  Even the 6 mil traces transferred cleanly.  However, it leaves a heavy white residue that looks like donut glazing under a 100x microscope. I don't know if it will produce pitted traces.  

I will post etch results as soon as I produce a properly aligned 2 sided pattern.