Homebrew PCBs

I think I know what I need, the problem is getting it.  The suppliers I've found so far either want huge MOVs or don't stock the size :-(.

What I want is 3 feet (or 1 meter) of PFA heat-shrink tubing with a wall thickness of 1.6mm to 2mm.  Finished (shrunk) size to be just under 22mm.

Is there anyone out there who can help?

D.

--- In Homebrew_PCBs@yahoogroups.com, "David C. Partridge" <david.partridge@...> wrote:
>
> I'm making progress on the high temp. sleeving.  I will update the list as and when.
> 
>  PS A good Google search is "high temperature heat shrink sleeving"
> 
> D.
> -----Original Message-----
> From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] On Behalf Of Andrew Hakman
> Sent: 29 March 2011 00:47
> To: Homebrew_PCBs@yahoogroups.com
> Cc: mlerman@...
> Subject: Re: [Homebrew_PCBs] High temperature sleeves for laminator rollers?
> 
> Pretty sure the heater is actually a large halogen lamp, that runs at line voltage (hence why there are 120V fusers, and 220V fusers).
> 
> Andrew
> 
> On Mon, Mar 28, 2011 at 5:35 PM, <mlerman@...> wrote:
> 
> >
> >
> > I'm sure it has been done. Just add a mechanical crank and a 
> > temperature controller using the built in thermistor and the built in 
> > heater (probably
> > 24 VAC) and you're done.
> >
> > Mark
> >
> > -----Original Message-----
> > >From: Erik Knise <elknise@...>
> > >Sent: Mar 28, 2011 6:21 PM
> > >To: Homebrew_PCBs@yahoogroups.com
> > >Subject: Re: [Homebrew_PCBs] High temperature sleeves for laminator
> > rollers?
> > >
> > >I've looked around only before but haven't seen anything. Also "high 
> > >temp laminator" doesn't return man useful search results.
> > >
> > >I know some people have tried to modify a laser printer to print 
> > >directly onto PCBs. What about making your own laminator built around 
> > >a fuser?
> > >
> > >--
> > >Erik L. Knise
> > >Seattle, WA
> > >
> > >On Sat, Mar 26, 2011 at 9:35 AM, David C. Partridge 
> > ><david.partridge@...> wrote:
> > >> The technology for high temperature rollers exists as fusers run at
> > temperatures above 200C, and in some cases at lot above that.
> > >>
> > >> The rollers on this laminator are 22mm dia, and the sleeves about 
> > >> 2mm
> > thick.
> > >>
> > >> Does anyone know where to get new high temperature sleeves, and 
> > >> also how
> > they are fitted?
> > >>
> > >> Thanks
> > >> Dave
> > >>
> > >
> > >
> > >------------------------------------
> > >
> > >Be sure to visit the group home and check for new Links, Files, and
> > Photos:
> > >http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> > >
> > >
> > >
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>