Homebrew PCBs

David,

I have a Tamerica LP-120 laminator with a temperature dial. I set it to 160 deg C (max temperature). I let it stabilize for 15 min. and then laminate for 8 passes, rotating the board 90 deg. each pass. After 8 passes, the board is fairly hot to the touch.

Baxter

--- In Homebrew_PCBs@yahoogroups.com, "David C. Partridge" <david.partridge@...> wrote:
>
> What temperature do you have your laminator set to please?
> 
> If it is within the range of my good laminator, I may just buy a 1320 just for PCB work.
>