Homebrew PCBs

On 03/18/2011 06:41 PM, Eldon Brown wrote:

> What happened to the good old High School Shop Classes??

In my country at hihg scholl we only did:

http://en.wikipedia.org/wiki/Shaper
http://en.wikipedia.org/wiki/Drill#Drill_press
http://en.wikipedia.org/wiki/Lathe
http://en.wikipedia.org/wiki/Milling_machine



> To align the first cut with the PCB art work, clamp the PCB between to
> straight boards, align the art work with the scrap edge sticking out between
> the boards, use at least 4 screws from below for clamping. The boards should
> cover and be wider then the non-scrap side of the PCB material. Use the
> fence and Push Block to make a straight cut.

I'll try to look for a video online to see if I have understood

bye
as