Homebrew PCBs

Too funny .. I have a definite no and yes LOL
Yeah .. more reading .. not fusing to the board .. 
I guess if you can rub it off the etchant is going
to get in and under it anyways?




________________________________
From: Donald H Locker <dhlocker@...>
To: Homebrew PCBs <Homebrew_PCBs@yahoogroups.com>
Sent: Thu, February 17, 2011 8:12:12 PM
Subject: Re: [Homebrew_PCBs] Re: Toner not sticking to PCB well

  
NO!!!

Donald.
Reason - Toner is not water soluble.
--
*Plain Text* email -- it's an accessibility issue
() no proprietary attachments; no html mail
/\ ascii ribbon campaign - <www.asciiribbon.org>

----- Original Message -----

> From: "Randy S." <rj3819@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Thursday, February 17, 2011 1:56:36 PM
> Subject: Re: [Homebrew_PCBs] Re: Toner not sticking to PCB well
> 
> Can not soaking the board for long enough prior to rubbing it off with your 
>thumb
> cause the toner to come off the board?
> 
> 
> 
> 
> ________________________________
> From: Jeff Heiss <jeff.heiss@...>
> To: Homebrew_PCBs@yahoogroups.com
> Sent: Thu, February 17, 2011 1:48:14 PM
> Subject: Re: [Homebrew_PCBs] Re: Toner not sticking to PCB well
> 
> 
> I used a modified GBC laminator. Check "Another GBC Laminator Mod" in 
> the Photos area for pictures.
> 
> On 2/17/2011 1:19 PM, Randy S. wrote:
> >
> > Which laminator do you use and if its not available .. have any 
> > suggestions?
> >

[snip]




      

[Non-text portions of this message have been removed]