Homebrew PCBs

More likely not hot enough.  Too hot, they will melt together; too cool, they won't melt to the copper.  The copper and the toner both have to be hot enough for successful adhesion.

Donald.
--
*Plain Text* email -- it's an accessibility issue
()  no proprietary attachments; no html mail
/\  ascii ribbon campaign - <www.asciiribbon.org>

----- Original Message -----

> From: "Randy S." <rj3819@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Thursday, February 17, 2011 1:13:58 AM
> Subject: Re: [Homebrew_PCBs] Toner not sticking to PCB well
> 
> Could it also be not enough toner? 
> I tried to make the copies less dark .. 
> 
> 
> 
> 
> ________________________________
> From: Randy S. <rj3819@...>
> To: Homebrew_PCB <homebrew_pcbs@yahoogroups.com>
> Sent: Thu, February 17, 2011 1:09:39 AM
> Subject: [Homebrew_PCBs] Toner not sticking to PCB well
> 
>   
> OK .. went from the problem with the traces running together 
> to the toner not sticking well to the copper .. 
> 
> Can it be that I'm not heating long enough ? 
> 
> Or can it also be that specific toner ? 
> 
> Its from a newer model HP copier .. 
> 
> Randy
> 
> 
>  
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> 
> 
>