Homebrew PCBs

Hi,

I'm the poster of that project, and there are a few caveats you 
should know. It seems that I can make fairly small boards (2x2 
inches) very well, but larger ones are more variable in result. I 
have been trying other printers, like the LJ 2200 that someone 
mentioned, but I cannot get reliable results. The 2200 will allow a 
very straight path with very simple modification, but I cannot get 
the printing to be consistent. I will continue to work on this 
project in my spare time and would very much welcome any input or 
comments, but there is still a lot of work to be done.

Mark

At 05:54 AM 12/19/2010, you wrote:
>Hi
>
>See this this link for your reference for laser printer modification
>http://www.pbase.com/mark10970/lexmark_e260_hack&page=6
>
>
>Best Regards
>Rizqi
>
>
>
>________________________________
>From: samsagazzzz <samsagazzzz@...>
>To: Homebrew_PCBs@yahoogroups.com
>Sent: Sun, December 19, 2010 11:07:28 AM
>Subject: [Homebrew_PCBs] Re: Inkjet or Laser
>
>
>
>oh, ok, i want to modify the printer, just want to know if an inkjet printer
>will give me nice quality pcbs
>
>--- In Homebrew_PCBs@yahoogroups.com, "Herbert E. Plett" 
><cachureos@...> wrote:
> >
> > laser is not for direct printing, it's for transfer.
> > inkjet is used for UV mask creating. direct printing requires 
> modification of
> >printer (Epson type), not something for light-hearted.
> >
> >
> > --- On Sat, 12/18/10, samsagazzzz <samsagazzzz@...> wrote:
> > > Hi guys, im planning to purchase a
> > > new printer to modify to directly print in the PCBs before
> > > etching. Someone know if will get better pcbs using Inkjets
> > > or Laser?
> > >
> > > Thanks
> >
>
>
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>