Homebrew PCBs

Looks like some sort of electroless flash copper plating with a tin plating afterwards.

I've been using the Think and Tinker method with huge success.
http://www.thinktink.com/stack/volumes/voli/store/inksup.htm
its very simple and much less involved then the video.

I use the Think and Tinker conductive ink.  For the plating solution I use the Caswell Plating solution.
http://www.caswellplating.com/kits/plugnplate.htm
I just purchase the chemicals and do it with a standard 10 amp power supply.

I'm finishing up my own you tube videos shortly.

Voodoo

--- In Homebrew_PCBs@yahoogroups.com, Athar Kaludi <ceo_premium@...> wrote:
>
>  
>         	The process offered by KINSTEN Taiwan
>  for thru plating is shown in link below. If any one using just help me 
> providing info on the GEL which the person is applying to mask the whole
>  board in first step from brown tube and drying by hair dryer
>  and in last step before electroless he is removing the mask for copper 
> to take part in plating. I am looking for GEL and remover.
> 
> My chemical supplier advice to use PVA cream glue. Whoever using have idea on that.
> 
> 
> 
> http://www.youtube.com/watch?v=koT4tUit6aU
> 
> 
> Reply if you have experienced this or any product like this
> 
> 
> Regards
> 
> Kaludi Athar
> 
> PAKISTAN
> 
> 
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>