Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: [Homebrew_PCBs] PCB drilling speed and feed rates

2010-06-30 by Simao Cardoso

Ivan Peterson wrote:

> May be in your case (@5400) you have to reduce it up to 4 in/m ! 

At 1mil per revolution would be 5.4in/minute. But it can be faster for
most diameters.

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.