Homebrew PCBs

>From: "tamerlane221" <T_dragger44@...>
>Reply-To: Homebrew_PCBs@yahoogroups.com
>To: Homebrew_PCBs@yahoogroups.com
>Subject: [Homebrew_PCBs] Guidance & possible fee work
>Date: Sun, 07 Sep 2003 15:21:50 -0000
>
>Homebrewers...
>
>      I've been subsribed to the group and reading posts for several
>months now with the goal of learning enough to be able to fab a few
>simple boards.  Unfortunately, it's not happening through "osmosis" so
>I wonder if you guys could recommend a book or two that I could buy
>that would cover the basics.  A lot of you clearly know what you're
>doing but the discussions about the nuances of using printers and
>playing with various chemical etchings is above my head right now so I
>figure I'd better find something that covers the basics.  Any help
>would be appreciated.
>
>Finally, one of the near term goals is to fabricate a couple of small
>boards for carrying some LEDs and a few amplifiers and regulators,
>(nothing real complex from a circuit standpoint).  Does anyone here
>offer a service to make boards like this?  I would be interested in
>talking with someone who could provide a fee service for a little
>assistance with the board design and then actually make a few prototypes.

I often do this sort of thing for people. Have a look at my web site, and 
have helped people to get their own PCB processes working properly at home.

I don't have any trouble with single-sided boards using 12/12 (12 mil tracks 
and 12 mil between tracks) design rules, and can go down to 10/10 on 
occasions. I normally use 15/15 to make things easy for myself.

Regards,

Leon
--
Leon Heller, G1HSM Tel: +44 1424 423947
Email:leon_heller@...
My web page: http://www.geocities.com/leon_heller

_________________________________________________________________
It's fast, it's easy and it's free. Get MSN Messenger today! 
http://www.msn.co.uk/messenger