Homebrew_PCBs

> aussiedude36 wrote:
> > I have recently decided I need to utilize SMT resistors on one of

my

> > designs as there simply isn't room for regular thru hole

resistors.

> >>From reading recent posts it seems as if I would simply use

solder

> > paste to glue/hold the SMT res. in place then heat it to melt the
> > solder. Can I do this with a soldering iron or do I need an

expensive

> > hot air type machine? What stops the solder paste from bridging

the 2

> > pads beneath the SMT Resistor? Any suggestions would be

appreciated.


Look in the Links section, there's a link to the Seattle Robotics
newsletter with a method of SMT soldering using a toaster oven. I've
never done it myself. The surface tension of the liquid solder pulls
it together and away from non-wetted surfaces.

> > Be sure to visit the group home and check for new Bookmarks and

files:

> > http://groups.yahoo.com/group/Homebrew_PCBs

Steve