Homebrew PCBs

I was starting to have some problems getting good alignment when
drilling the smaller holes/pads on some of my home brew pcbs. (larger
pads (>40mils) etched as an annulus are not really an issue)
 Figured better illumination might help.

 This was such a cheap & simple mod, and since it worked out so
well... I thought I'd share a couple of pics.

 http://picasaweb.google.com/hcarlott/DrillPressLEDHaloMod

 Cheap led ring from DX and some double stick tape.
http://www.dealextreme.com/details.dx/sku.25513  (they have different
sizes ranging from 60 to 90mm).


-- 
carl
--------------------------------------------------------
Henry Carl Ott   N2RVQ    hcarlott@...