I use a HF paper cutter - this is the one I use:
http://www.harborfreight.com/12-inch-x-9-3-4-quarter-inch-paper-cutter-9805.html
I move the PCB out to mid ways and it cuts pretty good up to .062", but the .032" is better. I wish I had got this one - it's larger and - I think it would have cut the .062" with less pressure:
http://www.harborfreight.com/18-inch-x-15-inch-paper-cutter-90874.html
This cuts about as well as anything going - MUCH less hassle than saws and such like. The shear listed before would be my choice, BUT for nearly $400 vs $13...... Hard choice.... well, maybe not.
Ken H>
http://www.harborfreight.com/12-inch-x-9-3-4-quarter-inch-paper-cutter-9805.html
I move the PCB out to mid ways and it cuts pretty good up to .062", but the .032" is better. I wish I had got this one - it's larger and - I think it would have cut the .062" with less pressure:
http://www.harborfreight.com/18-inch-x-15-inch-paper-cutter-90874.html
This cuts about as well as anything going - MUCH less hassle than saws and such like. The shear listed before would be my choice, BUT for nearly $400 vs $13...... Hard choice.... well, maybe not.
Ken H>