Homebrew PCBs

Ken, you are entirely correct -- getting this saw just to cut a few PC boards would seem like major overkill. In my case, I already had the saw to support my home machine shop and welding activities. If you need to cut metal very often, this saw will be a very welcome change from a hacksaw!

--- In Homebrew_PCBs@yahoogroups.com, "sailingto" <sailingtoo@...> wrote:
>
> Those are nice bandsaws - but sure seem a bit of "overkill" for tiny little PCB - well, my boards anyway are always less than a 4"X6" size.  I use the HF paper cutter - cheap, and does a good job on anything up to .062".
> 
> This is the one I have: 
> 
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=90874
> 
> it was on sale, but thinking about getting this larger one:
> 
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=90874
> 
> $20USD vs $25USD isn't much difference.  When I purchased my paper cutter at HF I think there was over $10 difference.
> 
> Ken H.
> 
> --- In Homebrew_PCBs@yahoogroups.com, Steve <steve65@> wrote:
> >
> > Thank you. There's a Harbor Freight nearby, I'll take a look.
> > 
> > Steve
> > 
> > On 4/18/2010 9:24 PM, awakephd wrote:
> > > Steve, Home Depot does not carry these, to the best of my knowledge, nor does Lowe's. Instead you need a Harbor Freight or similar store:
> > >
> > > http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93762
> > >
>