Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, Steve <steve65@...> wrote:
>
> Thanks for the info guys.
> 
> I found some information on the web about the TL901, but nothing about 
> temperature. How does one know before purchase if a particular laminator 
> will heat the board to the 300F range?
> 
> And, if I had a laminator, how would I measure the temperature to which 
> it heats the board?
> 
> Steve
> 

Easiest thing to do is buy a laminator that someone else already has experience with.

I used an IR thermometer to measure the roller temperature when I was modifying mine.