Homebrew PCBs

> Then I had the hair-brained idea of using HP Presentation Paper instead
> of Pulsar TTP. Maybe others succeeded with it, but I wound up with a
> white film on top of the toner which wouldn't come off with rubbing or
> water. Apparently, some of the paper fibers stuck to the toner image.

Jim,

If you want to remove the grey haze from your toner transfer, try
a Mr. Clean Magic Eraser. Most supermarkets carry them. A few light
rubs with a wetted Magic Eraser removes it and doesn't damage the toner.

Baxter