Homebrew PCBs

http://www.delorenzo.com.mx/prods_i/prods/proto/through/index.htm

http://www.t-tech.com/order/category.asp?sectionid=2&catid=65&catname=Thru+Hole+Materials



--- On Thu, 2/11/10, KeepIt SimpleStupid <keepitsimplestupid@...> wrote:

From: KeepIt SimpleStupid <keepitsimplestupid@...m>
Subject: Re: [Homebrew_PCBs] Re: Printed circuit board eyelets
To: Homebrew_PCBs@yahoogroups.com
Date: Thursday, February 11, 2010, 10:20 PM







 



  


    
      
      
      I bout some, some 20 years ago probably from an Electronics distributer called Priority 1 Electronics.  I don't think they are around anymore.  They could have been made by Vector Electronics.



They were just as you said. Came in strips of about 10-20 and the broke off easily.  Like small tacks.  One on top of the other.



--- On Wed, 2/10/10, DJ Delorie <dj@...> wrote:



From: DJ Delorie <dj@...>

Subject: Re: [Homebrew_PCBs] Re: Printed circuit board eyelets

To: Homebrew_PCBs@ yahoogroups. com

Date: Wednesday, February 10, 2010, 1:36 PM



 



I wonder if they could make via-pins?  Just a simple pre-cut wire with



a flange on one end, designed to press-fit into a 13.5 mil hole and be



soldered on both sides.



I suppose it would be easy enough to buy 13.5 mil wire (or slightly



larger?), and cut it to length with some shearing action that left a



bend on the top...



[Non-text portions of this message have been removed]





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]