Homebrew PCBs

I bout some, some 20 years ago probably from an Electronics distributer called Priority 1 Electronics.  I don't think they are around anymore.  They could have been made by Vector Electronics.

They were just as you said. Came in strips of about 10-20 and the broke off easily.  Like small tacks.  One on top of the other.

--- On Wed, 2/10/10, DJ Delorie <dj@...> wrote:

From: DJ Delorie <dj@...>
Subject: Re: [Homebrew_PCBs] Re: Printed circuit board eyelets
To: Homebrew_PCBs@yahoogroups.com
Date: Wednesday, February 10, 2010, 1:36 PM







 



  


    
      
      
      

I wonder if they could make via-pins?  Just a simple pre-cut wire with

a flange on one end, designed to press-fit into a 13.5 mil hole and be

soldered on both sides.



I suppose it would be easy enough to buy 13.5 mil wire (or slightly

larger?), and cut it to length with some shearing action that left a

bend on the top...



    
     

    
    


 



  






      

[Non-text portions of this message have been removed]