Homebrew PCBs

Harvey White <madyn@...> writes:
> Haven't used press & Peel, according to pulsar, it needs a lot of
> heat.  They might be biased.

Pulsar paper with Brother toner needs a lot of heat too.

> Check the fuser temperature on the brother, some brothers use a high
> temperature toner that will just complicate the problem.

I did some tests with my temp-controlled laminator, and found that the
default temp of the laminator is around 320 F but the Brother toner
really wants around 370 F.  Even HP toner works better at 350 F.