One-time is just what I had in mind.
Appreciate the flag.
Regards,
Roger
From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] On Behalf Of Stefan Trethan
Sent: Tuesday, December 22, 2009 9:44 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: Re: [Homebrew_PCBs] Looking for a photo etching vendor
People might be reluctanct because of the tin in the bronze. I'm not
sure what it will do, but I'd avoid putting anything other than copper
in my etching tank.
You can always try with a one-time use small batch of etchant first.
HCl and H2O2 (3% dilute) will do the trick.
ST
On Tue, Dec 22, 2009 at 6:33 PM, m10000_little_zip
<m10000_little_zip@... <mailto:m10000_little_zip%40yahoo.com> > wrote:
Appreciate the flag.
Regards,
Roger
From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] On Behalf Of Stefan Trethan
Sent: Tuesday, December 22, 2009 9:44 AM
To: Homebrew_PCBs@yahoogroups.com
Subject: Re: [Homebrew_PCBs] Looking for a photo etching vendor
People might be reluctanct because of the tin in the bronze. I'm not
sure what it will do, but I'd avoid putting anything other than copper
in my etching tank.
You can always try with a one-time use small batch of etchant first.
HCl and H2O2 (3% dilute) will do the trick.
ST
On Tue, Dec 22, 2009 at 6:33 PM, m10000_little_zip
<m10000_little_zip@... <mailto:m10000_little_zip%40yahoo.com> > wrote:
> Any interest in testing this on the parts I am looking for? I'll provide material and artwork!![Non-text portions of this message have been removed]
>
> Thanks for your consideration, Bryan
>
>