Homebrew PCBs

Harvey White <madyn@...> writes:
> Just solder making the connection between layers is not a good idea.
> If the connection is from a trace to a pit (what would be a blind via,
> not all the way through), I'd use a wire and solder it.  
> 
> If the connection is through a board (full via) connecting top and
> bottom layers, solder is not the way to go.  There's no way to
> guarantee that the solder flows down into the hole and makes the
> connection.  

Having tried these, I can pretty much guarantee that the solder will
*not* go down the hole, or into the pit, or whatnot.  Way too much
surface tension.

> The solder that helps hold them in place can wick down the wire, but
> is not the prime connection.

In my experience, it doesn't wick down the wire into the hole.  You've
seen it happen with *plated* holes, but without plating, it just stays
at the surface.