Homebrew PCBs

----- Original Message ----- 
From: <christiansen_alex@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Sunday, December 06, 2009 6:35 PM
Subject: [Homebrew_PCBs] 105 u copper needed


> hello members
> I have a customer that, maybe order a few pcb at me, but
> he ask for 105 u copper layer ,singlesided .
> Does anyone here have some board with this copper thickness.?
> I will need two pieces of 140 x 100 mm .
> It would be best if it was with photoresist .
> If you have somthing for me ,then send an email to
> christiansen_alex@... and give me a price .
> I'm situated in denmark
> if its not with photoresist, then I have to learn the method with transfer 
> from laser ..and then I was thinking , wether any of you had used the kit 
> with laminator and transfer sheet from
>  http://www.pulsar.gs/
> it looks like the perfect thing.. but is it..
> alex
> denmark

1 oz per sq. ft. copper laminate (the commonly used material) is 35 u. 105 u 
would be 3 oz. It is made, but is probably difficult to buy in small 
quantities. See if you can cadge some from your local PCB manufacturer.

Leon