Homebrew PCBs

This is getting rather old. Andrew, would you please fix your spam filter, or edit the subject line when it adds the "probable spam" text to it?

I've asked you many, many times. Surely there is a whitelist you can add the list address to in order to prevent this.

Respond off-list.

Steve Greenfield
your grumpy neighborhood moderator

--- In Homebrew_PCBs@yahoogroups.com, "Andrew Mathison" <andrewdavid.mathison@...> wrote:
>
> Dear Billshat44
> 
> in Eagle (haven't done it for years!) you select a "Change" and change pad sizes to what you want.......up to over 0.5" if necessary!!
> 
> Look in help, you should use PAD as a search and you will find all the infos you need, including:-
> 
> The pad shape or diameter can be selected while the PAD command is active, or it can be changed with the CHANGE command, e.g.: 
> CHANGE SHAPE OCTAGON .The drill size may also be changed using the CHANGE command. The existing values then remain in use for successive pads. 
> 
> 
> 
> I hope this helps,
> 
> 
> 
> Andy
> 
> 
> 
> [Non-text portions of this message have been removed]
>