Homebrew PCBs

Dear Billshat44

in Eagle (haven't done it for years!) you select a "Change" and change pad sizes to what you want.......up to over 0.5" if necessary!!

Look in help, you should use PAD as a search and you will find all the infos you need, including:-

The pad shape or diameter can be selected while the PAD command is active, or it can be changed with the CHANGE command, e.g.: 
CHANGE SHAPE OCTAGON .The drill size may also be changed using the CHANGE command. The existing values then remain in use for successive pads. 



I hope this helps,



Andy



[Non-text portions of this message have been removed]