Homebrew PCBs

----- Original Message ----- 
From: "cary heestand" <c.hhestand@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Tuesday, November 10, 2009 3:47 PM
Subject: Re: [Homebrew_PCBs] tape for resist?


Thank you all for the great replies!

Leakage on the edges won't be a problem.

I originally was going to use a "ball shaped burr" in a dremel tool and 
still might go that way. But then thought about using tape and etching.

I didn't know you could use a Sharpie on it's own. I thought that was just 
for repair of toner transfer.

Spray paint will work? For what I have to do that might be the way to go. 
Then I could just remove the paint where the pads are and leave the rest of 
paint as a solder mask!

I used to use cellulose paint as etch resist.

Leon